Sous-traitance electronique

IOT products

         

Name	Flexytag	Raspberry Pi HAT	NINA B3 USB dongle	PIR motion sensor
Use case	Environmental monitoring	Open Wirepas gateway solution	Wirepas sink / low latency node for unlimited network extension	Tracking occupancy in the premises
Features	•  Accelerometer •  Sensor contacts •  Luminosity sensor (optional) •  Atmospheric pressure sensor (optional) •  Magnetic switch (optional) •  Water leak cable (optional)		•  LED color codes •  4-in-1 environmental sensor (optional)	•  PIR sensor (5m / 11m detection range) •  3D accelerometer (optional) •  3D magnetometer (optional) •  4-in-1 environmental sensor (optional) •  Grid-Eye 8x8 thermal camera (optional)
Power supply	2.4Ah, 3.6VDC lithium AA battery	3.3DCV (from Raspberry Pi board)	5V USB connector	CR17505 battery (1 or 2)
Dimensions	69.5mm x 32.5mm x 29mm	52mm x 30mm	52.9mm x 17.4mm x 9.5mm	89.5mm x 83.5mm x 26mm

 

 

 

 

Name	Gateway	Water leak detector	AER	Wirepas development kit
Use case	Complete Wirepas gateway solution	Environmental monitoring	Environmental monitoring	Asset tracking and environmental monitoring
Features	•  STM32F7 Processor  •  4.3 inch LCD touch screen  •  4-in-1 environmental sensor  •  Wi-fi, Ethernet support  •  SD Card for offline operation (optional)  •  Second Ethernet port (optional)  •  Expansion Slots (Arduino shield, Minibus slot)  •  3G SARA click (optional)	•  Water leak cable  •  Sensor contacts  •  Accelerometer (optional)  •  Temperature/humidity sensor (optional)	•  CO2 sensor                           • Detects 18 different gases in the nearby environment and fine particles	•  1 Raspberry Pi 3B starter kit  •  10 Ruuvitag  •  1 NINA B3 USB dongle  •  1 Raspberry HAT  •  1 Promistel USB flash drive with instructions  •  1 nRF52 development kit  •  1 Tag-connect cable
Power supply	5V USB connector	2.4Ah, 3.6VDC lithium AA battery	•  3.6V through PRM1033 shield  •  3V direct from the mains
Dimensions	140mm x 90mm x 40mm	69.5mm x 32.5mm x 29mm	125.8mm x 97.3mm x 48mm

  

 

 

Name	Triangle tag	Fuji tag	Micro-tag	EOZ S.Series 12-button keypad dev kit
Use case	Security, environmental monitoring	Industrial tracking system	Tracking applications, where size matters	Access control, vending, security
Features	•  Temperature sensor  •  Humidity sensor  •  Luminosity sensor   •  Accelerometer  •  Magnetic switch	•  Temperature sensor  •  Humidity sensor  •  Accelerometer	•  Temperature sensor  •  Accelerometer  •  Audio output (optional)	•  Temperature sensor  •  Accelerometer  •  Magnetometer
Power supply	CR2477 or CR2450 battery	CR2477 battery	Rechargeable 130mA pin type battery	•  5V, 300mA through PRM1053 I/O board  •  3.6V through PRM1033 shield
Dimensions	35mm x 35mm x 15mm / 35mm x 35mm x 20mm	60mm x 40mm	12mm x 12mm	96mm x 115mm x 25mm
	Replaced by Flexytag